A4: J0 Base
A4-J0-BASE-1.0
$2.08
The J0 base has mounting holes for the J0 motor. Thrust bearing J0 is contained on top of the J0 base.
Downloads/Links
A4 FreeCAD AssemblySTL File
A4 Manual
3D Printing Parameters
| Material | PLA |
| Wall Thickness | 1.6mm |
| Top/Bottom Thickness | 1.6mm |
| Initial Layer Speed | 30mm/s |
| Print Speed | 60mm/s |
| Infill | 25% |
| Support | 80° |